Manufacturers

Viewed products

E4020 Camera Optical Fiber Adaptor

e4020

Part of SWIT Fiber Camera System

SWIT Fiber Camera System includes the Camera optical fiber adaptors and CCU as the main essential devices. E-4020 is the camera adaptor to communicate with CCU via Lemo or Neutrik cables, transmit camera SDI, switcher return SDI, intercom, TALLY, camera remote etc.

More details

Add to wishlist

More info

E-4020 - Camera Optical Fiber Adaptor

  • Camera Adaptor of SWIT Fiber Camera System
  • Lemo / Neutrik connection optional
  • Camera SDI input and loop output
  • Switcher Return SDI output
  • Return SDI on/off control
  • TALLY display and output to monitor
  • Headset input, Volume +/- adjustment
  • Sony / Panasonic camera remote input
  • V-mount or Gold mount camera installation

Camera Optical Fiber Adaptor

Part of SWIT Fiber Camera System

SWIT Fiber Camera System includes the Camera optical fiber adaptors and CCU as the main essential devices. E-4020 is the camera adaptor to communicate with CCU via Lemo or Neutrik cables, transmit camera SDI, switcher return SDI, intercom, TALLY, camera remote etc. E-4020A is Gold mount connection and E-4020S is V-mount connection.

E2040P Camera Optical Fiber Adaptor

E2040P Input and Output

Input and Output

E-4020 camera adaptor supports:
1x 3G/HD/SD camera SDI input
1x 3G/HD/SD camera SDI loop output
1x 3G/HD/SD return SDI output
1x Camera Remote input (Panasonic or Sony)
1x TALLY/DC Power output
1x Return SDI on/off button input
1x Headset input

Complete EFP Application

Complete EFP Application

SWIT Fiber Camera System offers a complete EFP solution via Camera Adaptor E-4020 and the CCU E-1040P.
The supported transmission includes:

  • Camera SDI to CCU
  • Switcher returned SDI to cameras
  • Full duplex intercom between cameras and CCU
  • TALLY signal from CCU to cameras
  • Camera remote control at CCU
  • Power distribution from CCU to cameras

Lemo / NEutrik Connector

Lemo / Neutrik Connector

Optical fiber and Power supply

E-4020 communicates with CCU E-1040P via Lemo 3K.93C cable or Neutrik NO2-4FDW-A cable for optional.
In this system, the Lemo/Neutrik optical fiber cable offers Max 20km transmission distance without power supply, and 300m transmission distance with 55W power distribution from CCU to camera (independent channels), by connecting with Power Station E-2010P.
You can also directly insert LC pure optical fiber cables into Neutrik connector to achieve all communications except power supply.

E2040P Remote Control Input

Remote Control Input

Connect camera remote port to camera adaptor E-4020, and connect remote controller to CCU, so that you can control all the cameras in the system at CCU end.
The RCU input port of E-4020 is 10-pin standard (default for Panasonic), and the package provides a 10-pin to 8-pin conversion cable to fit SONY camera remote port.

E4020P Return SDI

Return SDI and TALLY output

In the system, when E-1040P CCU is connected to Switcher and input return SDI and TALLY signal, all the camera adaptors in the system will receive return SDI and TALLY.
E-4020S provides a TALLY light that can display TALLY directly. By connecting with SWIT S-1071F(EFP) on-camera LCD monitor, E-4020 can output return SDI and TALLY to the monitor, and the return SDI can be Pic-in-Pic displayed over the local SDI video at S-1071F(EFP).
The system provides a return SDI button to be fixed on tripod handle, and press the button will popup the PIP return SDI window, and release the button, the window disappears.
Find more details for S-1071F(EFP) Pic-in-Pic Monitor at:

Monitor Swit S-1071F

E4020P Intercom Control Panel

Intercom Control Panel

E-4020 supports Full duplex intercom with CCU in the system. A headset is provided in the package, and cameramen can adjust volume on the E-4020.
The status LED indicates the CCU operations during the intercom:

Status A on Bi-directional intercom with CCU
Status B on
Status A off CCU's Mic is turned off
Status B on
Status A on Camera adaptor's Mic is turned off by CCU
Status B off

E4020P Tally Output

Return SDI and TALLY output

In the system, when E-1040P CCU is connected to Switcher and input return SDI and TALLY signal, all the camera adaptors in the system will receive return SDI and TALLY.
E-4020S provides a TALLY light that can display TALLY directly. By connecting with SWIT S-1071F(EFP) on-camera LCD monitor, E-4020 can output return SDI and TALLY to the monitor, and the return SDI can be Pic-in-Pic displayed over the local SDI video at S-1071F(EFP).
The system provides a return SDI button to be fixed on tripod handle, and press the button will popup the PIP return SDI window, and release the button, the window disappears.
Find more details for S-1071F(EFP) Pic-in-Pic Monitor at:

Monitor Swit S-1071F

Standard Accessories

E-4020 Camera Optical Fiber Adaptor provides the following essential accessories for you to build up system:
Headset ×1
Remote conversion cable (10pin to 8pin) x1
TALLY & Power output cable (7-pin to DB9)* x1
Return SDI window on/off button* x1
* Used together with S-1071F(EFP) monitor

E4020P  Standard Accessories

Reviews

Write a review

E4020 Camera Optical Fiber Adaptor

E4020 Camera Optical Fiber Adaptor

Part of SWIT Fiber Camera System

SWIT Fiber Camera System includes the Camera optical fiber adaptors and CCU as the main essential devices. E-4020 is the camera adaptor to communicate with CCU via Lemo or Neutrik cables, transmit camera SDI, switcher return SDI, intercom, TALLY, camera remote etc.

Write a review

16 other products in the same category: