S-1071F 7-inch SDI/HDMI Waveform On-camera LCD Monitor

7-inch 1024×600 LCD
FFS panel with LED backlight

The S-1071F adopts a 7-inch FFS (Fringe field switching) LCD panel, with 1024×600 resolution and LED backlight, 400cd/m2 brightness and 900:1 contrast. The viewing angle is Horizontal: 160° / Vertical: 160°

Multi-format Input/Output
SDI / HDMI / CVBS / HDMI->SDI

S-1071F field monitor supports:
HD/SD-SDI input × 2
HD/SD-SDI loop output × 2
HDMI input × 1
HDMI loop output × 1
HDMI input converted to SDI output × 1
CVBS input × 1

Build-in HDMI to SDI Conversion

The build-in conversion is used to broadcast and deliver the HDMI camera video. It's same format conversion and supports the following HDMI formats:
480i, 576i, 720p (60 / 59.94 / 50), 1080i (60 / 59.94 / 50), 1080p (30 / 29.97 / 25 / 24 / 23.98)

Video Analysis Assistant Pattern
Waveform / Vector scope / Histogram

S-1071F supports Waveforms display under both SDI and HDMI, including Y, Cb, Cr, R, G, B channels, and full scale display of each channel. The Vector scope and R/G/B histogram can be switched on/off independently to the waveforms.


Embedded Audio Monitoring
HDSDI: 16-Ch; SDSDI/HDMI: 2-ch

The monitor displays SDI and HDMI embedded audio level meters, and supports full 16-ch meters under HDSDI input; 2-ch meters under SDSDI and HDMI input. The audio meter is green, and will turn yellow when exceeds -20dB, and turn red when exceeds -9dB.
The ch-1 and ch-2 embedded audio can be output via 3.5mm headphone socket.

Focus Assist

Under focus assist mode, the in-focused subject will be sketched out by red or blue lines. The focus assist is also available during the image zoom-in.
False color, Blue only, Zebra stripes, Internal colorbar

Safe Area and Scale Marker

You can select the scale of safe area frame from 80%, 85%, 90% and 95% in the menu system. And under HD input, the monitor can display a center 4:3 marker, to help composition the image when using HD recording while SD broadcasting.

Multiple Power Sources
AC adaptor / V-mount / Gold mount / Snap-on DV mount

The monitor provides a 4-pin XLR socket of DC 6.5-17V power input, and can be fixed on V-mount, Gold mount or DV battery plate.
Various types of DV battery plates are provided for optional, with snap-on designed, quick released and interchangeable with each other. There're following DV plates for selection:
Model of Plates    Compatible batteries
S-7004F    SONY NP-F970/770, SWIT S-8972, S-8970, S-8770
S-7004U    SONY BP-U60/U30, SWIT S-8U63
S-7004P    Panasonic CGA-D54/D28, SWIT S-8D62
S-7004B    Panasonic VW-VBG6, SWIT S-8BG6
S-7004J    JVC BN-V428U, SWIT S-8428
S-7004V    JVC BN-VF823, SWIT S-8823
S-7004i    SSL-JVC50, SWIT S-8i50
S-7004C    Canon BP-945/970G, SWIT S-8845, S-8945
S-7004E    Canon LP-E6, SWIT S-8PE6


3-color TALLY Light
Both front and rear side, DB-9 port

There is front and rear TALLY lights with 3 colors display, and controlled via DB-9 port on the rear panel.

Installation

The monitor provides 1/4"-20 screw threads on bottom, left and right side, for installing on camera handle or rigs. By S-7360 dual monitor stand, the 2 S-1071F monitors can be fixed on cranes.