Machine for the automatic production...
Machine for the automatic production of flat face masks (surgical).
Warning: Last items in stock!
This machine is mainly used for automatic forming of flat face mask: the whole roll of cloth is driven by roller after unwinding, and the cloth is automatically formed Fold edge and wrap edge. The nose beam is pulled and uncoiled in the whole roll, cut to a fixed length and then imported into the wrapped fabric, and the two sides are welded by ultrasonic welding to the seal, then through the ultrasonic side seal, through the cutter cutting molding; through the assembly line to the two masks the ear belt welding station, through ultrasonic welding, forms the final mask; when the mask is made, it is transported to the flat belt line through the assembly line collect.
DESCRIPTION OF APPEARANCE AND DIMENSION OF PRODUCTION LINE
Production speed: 120 pcs/min
EQUIPMENT INSTALLATION AND ENVIRONMENTAL REQUIREMENTS
6800mm(L)Å~3500mm(W)Å~1900mm(H); appearance color: ral9003.
In case of no special instructions, this standard shall be followed Reserve weight: ≤ 5000kg, ground bearing ≤500 kg/m2. Working power supply: equipment 220VAC ± 5%, 50Hz.
Rated power: About 9 kw; compressed air: 0.5 0.7 MPa, with a flow rate of about 300 L/min ; Operating environment: temperature 10-35, humidity 5-35% HR, non combustible, corrosive gas, no dust (cleanliness no less than 100000 Level).
AFTER SALES SERVICE OF EQUIPMENT
The warranty period of the equipment is 12 months from the date of formal acceptance of the equipment, and the failure caused by our company's responsibility occurs during production, our company will provide free warranty and parts delivery (for the conditions not stated in the specification, they will not be subject to this restriction).
All would be packed in wooden case. In order to be able to ship by air, it would be packed in below size of cases in the whole production line sets.